Dynamix DW 4 FXO Uživatelský manuál stáhnout pdf (Strana 12)

Dynamix IP PBX-100

After press Modify can input detail setting for Extension.

■ Press Apply to save configuration, or press Cancel to quit configuration.

Note:

• For more information about Extension setting, please refer to 3.Ful Web

Configurations

2.5.3 Trunk Configuration

User has to set Trunk account for Trunk (FXO device, e.g. Dynamix DW) to register to

IP PBX-100 or set some necessary configuration for SIP trunk (For more application, please

go to....... ). Enter Configuration Trunk to configure Trunk data.

On screen will show 1 sets Trunks. User can press Modify to add new Trunk or modify

Extension Number: Assign the number of Extension. This number is also the register

name for device.

Password: Assign the register password for device to register on IP PBX-100.

Dial Plan: Define the dialing pan for Extension.

Keypad: User can select Keypad type to be RFC2833, In-band, or SIP-lnfo. The

setting should be also match the Keypad setting of Extension device.

NAT Traversal: If the Extension is behind NAT but register to IP PBX-100 which is

under

Public IP, you should enable NAT Traversal otherwise the registration should be fail.

RTP Mode: User can choose for two type of RTP mode, one is Routed Mode another

is Direct Mode.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 68 69

Žádné komentáře

Dynamix DW 4 FXO Uživatelský manuál Strana 12