Dynamix UM-SB Uživatelský manuál stáhnout pdf (Strana 106)

DynamixUM‐SNBUserManualVer1.00105

Setup Serial Parameter, RTS

The behavior of the RTS (Request To Send) signal may be set in one of two ways. When set 'on', the RTS signal is always

forced on (active low), when set 'from DTE' the RTS signal will follow the DTE's condition. The default setting for RTS is on.

Setup Serial Parameter, CTS

The behavior of the CTS (Clear To Send) signal may be set in one of three ways. When set 'on', the CTS signal is always

forced on (active low), when set 'off' the signal is always forced off, or CTS will follow RTS (Request To Send) condition of 'on'

for RTS on 'off' for RTS off. The default setting for CTS is to follow RTS.

1 2 ... 101 102 103 104 105 106 107 108 109 110 111 ... 163 164

Žádné komentáře

Dynamix UM-SB Uživatelský manuál Strana 106