Dynamix DW-01 Uživatelský manuál stáhnout pdf (Strana 44)

Dynamix DW-01Plus/S Gateway User Manual

- 40 -

3.6 Hotline mode

The Hotline Mode is applied in limited two peers. User just picks up the phone set

and then hears ring back tone or dial tone depended on configurations of destination

device.

Step 1. Specify gateway service type as Hotline service.

Step 2. Create a Hotline table with [line] command.

usr/config$ sysconf –service 1

usr/config$ bureau –hotline 1 10.2.2.2 201

This example means that if user picks up phone set of FXS Line1, gateway will

automatically dial out IP address of [201].

Note:

If this gateway is under P2P mode, please set the phone book firstly.

The IP address of “bureau” command indicates the IP address of called party in

P2P mode, or the proxy server IP address in proxy mode.

Step 4. After the configuration, [commit] and [reboot] the device.

usr/config$ commit

usr/config$ reboot

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 99 100

Žádné komentáře

Dynamix DW-01 Uživatelský manuál Strana 44